« Arri SR2 | Home | Arricam Studio & Lite »
Arri 416
von Matthias Uhlig | June 28, 2007
Foto: www.arri.de
- Fps: 1 to 75 fps
Speed can be varied while camera runs. Ramps possible with Remote Control Unit RCU-1, Wireless Remote Control WRC-1 and Iris Control Unit ICU-1. - Shutter: Manually adjustable to: 45, 90, 135, 144, 150, 172.8, 180 degrees
- Film format: Super 16 mm, conforming to DIN 15602 and ISO-5768-1998
- Film gate: Super 16 only (12.35 x 7.5 mm, 0.486 x 0.295 inches)
- Lens mount: 54 mm stainless steel PL mount
- Sound: < 20 dbA @ 24 fps
- Flange focal distance: 51.98mm -0.01
- Movement: Silent precision movement, single pull down claw, single registration pin. Pull down pitch adjustable
- Viewfinder eyepiece: Same 8x eyepiece as 235
- Eyepiece extension: Same short and medium extensions as 235
- Ground glass: 16SR 3 fiber optic screens
- ARRIGLOW: RGB ARRIGLOW with custom combination of red, green and blue, separate brightness control on camera left side
- Weight: 416 (Camera body, viewfinder, eyepiece, IVS, magazine and film): about 5.5 Kg/12.1 Lbs; that is 25% less than a 16SR 3 in a similar configuration
- 416 Plus (Camera body, viewfinder, eyepiece, IVS, magazine and film): 5.7 kg/12.6 lbs; that is 28% less than a 16SR 3 in a similar configuration plus UMC-3
- Power input: 24 Vdc nominal, accepts 21 to 35 Vdc
- Power draw: 0.7 ampere, with camera running film at 24 fps, room temperature, IVS turned on, no on-board monitor or other accessory attached
- Battery: Intelligent 29.6V Lithium-ion On Board Battery OBB-2, lasts 5 magazines and about 2 hours in standby
- 80 Watt/hours at 950 g/2 Lbs with built-in power gauge
(comparison: 16SR 3 battery had 29 Watt/hours at 870 g/1.9 Lbs) - Charge time: 2 hours with ARRI charger
- Accessory power outputs: 1x 24V RS connector on 416, or 2x 24V RS connector on 416 Plus
- 1x 24V REMOTE connector
- 1x 24V Heated Eyecup connector
- 2x 12V MINI MONITOR connectors on IVS
- Temperature range: -20°C to +50°C (+4°F to +122°F)
- Magazine: 416 Shoulder Magazine 120/400 (SHM-3), Timecode module optional
- Timecode: Continuous barcode on film edge, 80 bit according to SMPTE RP 114 (same as on 16SR3). Timecode & Userbits window burn in and VITC on video assist possible.
Quelle: www.arri.de
Downloads:416 Manual, 416 Quickguide
Topics: Kamera 16 mm |
Kommentare
Sie müssen eingeloggt sein, um einen Kommentar verfassen zu können.